Brewing Up A Batch Of Beer With Grizzman

Here we go on another brew day adventure! This time we are whipping up a batch of a Russian Rivers favorite, Blind Pig IPA.

Here I have all the ingredients laid out on the table, malts, grains, hops, and everything else needed for the 10 gallon batch.

Now I got the grains steeping in the kettle while the water comes up to temperature, starting to turn the water into that caramel looking color.

Then once it comes to a boil and all the malt is added in, I add the first addition of the boiling hops to the water now called wort.

And here I'm throwing some more hops midway through the hour long boil.

After adding in more hops and cooling down the wort, it is time to transfer the wort from the kettle to the fermenting vessel - The Ferminator

Specific Gravity measurement to see the potential alcohol content, we won't know the final alcohol content until fermenting is finished and another sample is taken.

Finally I add in the liquid yeast to the wort to start the fermenting process and now make beer. This process called primary fermentation will last around 2 weeks, the entire time in the fermentation chamber at 66 degrees F. After that I will add in more hops for "dry hopping" and some oak wood chips and let it sit for about another week before bottling up the beer.

If you have any thoughts or questions I would be happy to hear them! Thanks for stopping by!