How to work vapor compression refrigeration system?????

source

Introduction:

Steam-compression refrigeration, which undergoes changes in refrigerant phase, is one of many refrigeration cycles and the most widely used method for building and automobile air conditioning. It is used in domestic and commercial refrigerators, large-sized warehouses for fatty foods and food, refrigerated trucks and other commercial and industrial services, oil refinery, petrochemical and chemical processing plants, and natural gas processing plants, which are used in domestic and commercial refrigerators. Which is often the major vapor-compression frost Using the Ion system.

Working Of Vapor Compression Refrigeration System:

The image shows the basic elements of a steam compression refrigeration system.
The picture shows that there is an evaporation, compressor, condenser and an expansion valve within the basic system. The refrigeration effect is obtained in the cold regions because the heat is extracted by the evaporation of the refrigerant in the liquid material. The refrigerant vapor compression from Bipolar is shrunk to a high pressure where its saturation temperature is higher than the ambient or any other heat transfer. So when high pressure, condensation of vapor in high temperature refrigerant fluid is performed by heat rejection heat, flowing through the condenser. To complete the cycle, the high pressure fluid is to flow through an expansion valve. The refrigerant reduction pressure and temperature in the expansion valve. This low pressure and low temperature refrigerant steam evaporates into the epaata taking heat in the cold regions. It should be noted that the system works on a closed cycle. System requires mechanical work size input. It exceeds heat from a cold place and refuses to heat heat to a high temperature.

source

Would you like to some points?
Then comment and also Follow me