PCB design and 3D modeling with KiCad

in #utopian-io7 years ago (edited)

PCB.jpg

What Will I Learn?

  • You will learn how to design the printed circuit board with KiCad.
  • You will learn 3D modeling of component materials.
  • You will get to design the real life look of your printed circuit board.
  • You will learn how to draw a flip-flop circuit.

Requirements

  • Using KiCad
  • To know basic electrics.
  • Basic printed circuit information.

Difficulty

  • Easy for those who understand electronics. :)

Tutorial Contents

In this tutorial, I explained how an electronic card was designed through kicad.First of all we will do a schematic drawing of the circuit. Then we will make a 3D model of our circuit board by switching to PCB. In this way, we will be able to get an idea of how our circuit board will look in real life.

Curriculum

Before the Utopian-io rules changed, I prepared a Turkish-language video about kicad at entry level. But I did not mention the topics in this tutorial.
You can access the content from the link below.
(This article is the continuation of the previous lesson.)
Lesson 1 ==> Click Here.
Lesson 2 ==> You're here.

Part 1: Creating a schematic drawing.

Adsız.png

Click on '' place component ''.
Then add the necessary materials for the flip-flop circuit.
Adsız3.png

List of circuit elements :

  • R1,R4 : 220Ω resistor (2 units)
  • R2,23 : 47KΩ resistor(2 units)
  • C1,C2 :10µf–16V capacitor (2 units)
  • Q1,Q2: BC237 transistor (2 units)
  • D1,D2: Red,Green LED(2 units)
  • 01x02 size connector (1 unit)

Part 2 :Draw the circuit

Adsız4.png

Run CvPcb to associate components and footprint.
Then we will add footprints from the drop-down menu.
Adsız5.png

Part 3: Adding footprints

1- View selected footprint.
2- Click 3d display(alt +3).
Adsız6.png

Then select the appropriate model from the list on the right.
Ideal dimensions in flip-flop circuit;

  • C1,C2 ==>Option 112= Capasitors_THT:CP_Radial_D4.0mm_P2.00mm
  • D1,D2 ==> Option 38= LEDs:LED_D3.0mm
  • Connector ==> Option 168 = Pin_Header_Straight_1x02_Pitch1.27mm
  • Q1,Q2 ==> Option 9 = TO_SOT_Packages_THT:TO-92_Molded_Narrow
  • R1,R2,R3,R4 ==> Option 67 =R_Axial_DIN0309_L9.00mm_D3.2mm_P15.24mm_Horizontal
    Adsız7.png

1 - Save the edits.
2- Close.
Adsız8.png

1 - Generate netlist
2 - Click generate button
3- Save file
Adsız9.png

Perform the annotate process by following the steps in the photo.
Switch to the pcb design screen by clicking the 'run pcbnew' button in step 4.
Adsız10.png

Part 4 : Circuit Board Design

1 - Click "read netlist" button.
2 - Click "read current netlist" button.
3 - If you get an error, it will appear on this screen.
4 - Closed.
5 - All the parts on the circuit were added.
Adsız11.png

1 - Click "Mode footprint" button.
2 - Global spreat and place.
3 - Spread out all footprints.
4 - If the warning screen appears, click yes.
5 - As you saw on the right side of the photo, all the pieces were separated from each other.
Adsız12.png

  • Move the circuit elements by pressing the "M" key.
  • Rotate the circuit elements by pressing the "R" key.
  • Place the circuit elements.
    Adsız13.png

1 - Choose a green color from the menu. Because we will apply the circuit drawing to the bottom of the board.(choose red if you want to draw on top of the board.)
2 - Click the button labeled '' add tracks and vias '' to draw the path.
3- The circuit lines will look like this.
Adsız14.png

  • It will look like this when you draw the circuit.
  • Draw the red road to avoid intersection in some places.
    Adsız15.png

Follow these steps to draw the boundaries of the card;
1 - Click "Add graphic line or polygon" button.
2 - Select ''Edge.Cuts".
3- The lines will look like this.
4- Press (ALT + 3) to switch to 3-D view.
Adsız16.png

Part 5 : 3D View

  • You will get a 3D image of your card.
    Adsız17.png

Activate options in the box for a more realistic image.
Adsız18.png
Adsız19.png

You can get 3d model output by clicking "File => Create Image (JPEG or PNG)".



Posted on Utopian.io - Rewarding Open Source Contributors

Sort:  

Thank you for the contribution. It has been approved.

  • I approved this one but do not turn this into series, if you want to create a tutorial be more specific about the subject. Unless you are serious to put them in reality, by saying this; turning your designs into physical ones aswell...

You can contact us on Discord.
[utopian-moderator]

Okey.Thank you:)

@remoteman, Approve is not my ability, but I can upvote you.

Hey @remoteman I am @utopian-io. I have just upvoted you!

Achievements

  • You have less than 500 followers. Just gave you a gift to help you succeed!
  • Seems like you contribute quite often. AMAZING!

Suggestions

  • Contribute more often to get higher and higher rewards. I wish to see you often!
  • Work on your followers to increase the votes/rewards. I follow what humans do and my vote is mainly based on that. Good luck!

Get Noticed!

  • Did you know project owners can manually vote with their own voting power or by voting power delegated to their projects? Ask the project owner to review your contributions!

Community-Driven Witness!

I am the first and only Steem Community-Driven Witness. Participate on Discord. Lets GROW TOGETHER!

mooncryption-utopian-witness-gif

Up-vote this comment to grow my power and help Open Source contributions like this one. Want to chat? Join me on Discord https://discord.gg/Pc8HG9x

Congratulations @remoteman! You have completed some achievement on Steemit and have been rewarded with new badge(s) :

Award for the number of upvotes

Click on any badge to view your own Board of Honor on SteemitBoard.
For more information about SteemitBoard, click here

If you no longer want to receive notifications, reply to this comment with the word STOP

By upvoting this notification, you can help all Steemit users. Learn how here!

Congratulations @remoteman! You received a personal award!

1 Year on Steemit

Click here to view your Board of Honor

Support SteemitBoard's project! Vote for its witness and get one more award!

Congratulations @remoteman! You received a personal award!

Happy Birthday! - You are on the Steem blockchain for 2 years!

You can view your badges on your Steem Board and compare to others on the Steem Ranking

Vote for @Steemitboard as a witness to get one more award and increased upvotes!

Coin Marketplace

STEEM 0.27
TRX 0.20
JST 0.039
BTC 97468.81
ETH 3593.60
USDT 1.00
SBD 3.89