Canadian Maple Leaf Halves after Generating Nano/colloidal Silver for 1 Month
Here you go: to some that wanted to see the effect on coins after the generation project. Stay tuned as I will update photos of these coins until they are completely gone(which may may take about 6 months)
This setup consists of:
- one 9999 canadian maple leaf coin cut in two with two holes drilled
- two wires, one red/one blue hooked into positive and negative of a 12 volt battery
- a stick holding the coin above a glass filled with distilled water
A couple hours later and you have colloidal silver
If you want to see the details of this "offgrid" generator than view my blog
After one month of generating:
Before:
How much colloidal silver can be produce with 1 coin and any way to test the ppm of the colloidal silver?
good question. I will try to keep track and let you know in a bout 6 months
What type of water are you using @tzcap?
Standard distilled, for my drinking colloidal I use laboratory distilled, make sure the glass is sterile first, and use a lid.
Pretty cool
Thanks, wait until you see them in a few months...
This post has received a 1.56 % upvote from @drotto thanks to: @tzcap.
This post is upvoted by Polsza for 75 %.
If you want help us growing upvote this comment.
Thanks !
This post was resteemed by @resteembot!
Good Luck!
Learn more about the @resteembot project in the introduction post.
Also - check out @reblogger, by reading this post.
Check out the other content resteemed by @resteembot.
Some of it is really cool!