SLC21W5 || THE SLEEVES BASE PATTERN FOR MEN'S SHIRTS.

jewel005 (59)in #pattern • 23 days ago (edited)

Good evening, dear friends; I am very happy to be able to partake in this contest, organized by dear @lunasiver; as I can recall, this is my very first time taking part in this contest, and I hope this content is of great benefit to you all, now let's get to work.

*Describe The Process Of Plotting Your Two Sleeves*

Before I lay my hands on any of my tools and equipment, I make sure I understand the formula I need to use and how I can implement it. Now let's start with the short sleeves.

_{SHORT SLEEVE}

_{The Things I Needed For The Drawing}

Then I began by dividing my back width, which was 46cm, into two, which gives me 23; adding the 1cm makes it 24cm; using 24cm, I made a square-sided box with it, then I went ahead and marked the four side A, B, C, D, respectively.

I then start the addition of points; first, in line A-D, I divide the width of my back by 6, then take it to the opposite line, which is the line between BC. In making the second point, I went down to the first line I made and took out 2.5cm, just as instructed.
Also, to get the 3rd point, I divided my back width, which was 46cm, into 6 to get the 3rd. Point also, don't forget to subtract an extra 1cm.

The three points I made earlier were a bit easier, and I flowed with them, but coming to point 4, I had a tough time breaking through it; after a while, I was able to find my arm circumference, and then I added 2cm to it just as instructed. Then I went on to make another square below the box as a result of taking 3cm out of the box. Then I went ahead to do the bindings between the points.

_{And this is how my short sleeves looks like😊}

_{Longs Sleeves}

I began my long sleeves by drawing a long vertical line down my cardboard, and then as instructed, I divided my back width which was 46cm into 2 then added an extra 1cm making it 24cm, this was my width measurement, then I labeled the 4 corners with A, B, C and D.

Then I measured out 1/6 of the 46cm which was my back width from A-D, then took it straight to the line between BC. Just like the short sleeves, I took out 2.5cm on the first line, making it line 2, then I went ahead to measure out 1/6 of my back width, then subtracted 1cm on line A-D.

I proceeded by measuring out 6cm to mark the width of my cuffs, then I measured the entire length, which was 24cm, and divided it by 3, which gave me 8cm. Then I added 1.5cm as instructed, and then I proceeded by adding another 5cm; from there, I moved up 8cm; this will serve as the opening of my sleeve cuff.

At this stage, I was done with the marking out of the points, so I bound the points together, with curves and some with lines, for example, I joined 2 with 3 on a curve
1 with 5 with a straight line, and also
7 with 8 with a straight line.

_{And this is how my longs Sleeves look like😊}

Place The Images Of The Layout Of Your Two Sleeves

Place Your Pattern For Back, Front, Collars, And Sleeves In An Image

Am so proud to contribute to such encouraging engagement, although am not a tailor but now I have a little idea about how their work goes ☺️. I'll like to invite my fellow friends to engaged in this beautiful challenge.

@kidi40
@bossj23
@entity01
I'll be so glad to see your write-up