SLC21W4 | Base pattern for men's shirt collars.

in #patronaje-s21w46 days ago (edited)

Assalam-o-Alaikum!!!

Greetings to my all STEEMIT members. How are you all . I am also fine ALHAMDULILLAH. And now I am going to share my homework task. So Let;s Started

image.png
Made in Poster my Wall

Make and explain the process of the collars learned in this class. You can post the initial photo with all the points marked, then when you have joined them show the final result. Use your own images.,
  • American collar:

So, first of all, we have to put a line through the inchi tape, which will be 14 cm in total, because the total is 14 cm colar, and because it is double, and that's why we have just 7cm. So we're going to take it together because if we open it up to double, 14 is halved and the side becomes centimeters, so we're going to take it 7 centimeters.

Because we are drawing And I've taken a line from D to C for that, and just like that from the top I've taken a B line that's 7 centimeters on both sides, and in addition to that, I've taken a 3.5 centimeter center. I have put a line which is a routed line that I will define half of it, then I tried to make the coler and its ban. And above I made a collar of two centimeters I've put the width and then I've made it the f-point that I've made, and I've tried it there, and I've given it a ban shape

image.pngimage.png

I've added a curve, which is exactly the same sister as this, and I has covered it in exactly the same way and in the same way I have also laid the width of the cover coler and I have placed the curve and made two corners because as we see that some of the men who wear the collar The corners are slightly longer and slightly curved If they are alone, then I have tried to calculate in this way that I have given six to seven points

image.pngimage.png
  • Italian Collar:

So let's go now the next is towards the collar for this also first of all I have taken its length in 7 cm and I have divided it into two parts we have to do it we have to make the ban and also make the coler. So, first of all, I have put a bread line in the center of the three point, five over centimeters, and its half-bean is 3.5 c.meter, and the collar is two centimeters. Besides, I did it To give the shape, from point two to point seven I have given the shape of his collar and from point five I have given the shape of his collar towards point nine which I have touched above the dotted line of three point.

image.pngimage.png

Apart from that, I have given the shape of the ban, which was the dot line of two points, towards the lower bean, I have drawn a line from this side towards the eight point and I have also drawn a line from the two point towards the D point. That Nova Point is me It also has a line drawn by me

image.png

  • Sport or casual collar:

  • Method 1:

image.pngimage.png

This cooler is very easy to make because it is not that difficult to cut but we can make it in two ways. It is to be made on a ban shape. While making a regular shape, I have taken care to keep the length of it in cm and put a line in the center which is the middle of it. And after that I number one to two On the side of the number it is made on it but on this side it is made a little higher and from a number towards the D point I have taken out a tip which is a little lower because while making the cooler we have to take care that The top point is slightly pointed and the bottom point is slightly less pointed

image.png

  • Method 2:

So now let's move on to the second method which is a little more difficult than the first meter, but the shape that it cuts into is much better. It has to be cut. We have to get the length and the girth exactly the same.

image.png

There is a cut on the side that is exactly in the shape of a curve that I had already made two points, plus I made a point from three points when I went to the side, I put it on there I have stopped the pan and after that I have mirrored the next pan exactly after that, one crore is towards the inside, then the second one is towards the outside and just like that, when I combined four to five points, they are very good. In a way, it has been cut into shape

image.png

  • Mao Collar:

We have also made the Moa collar . It was a bit difficult but it took me time to make it and for that too we first have to take a centimeter line to cut which is 14 cm is up and the total length of one color is 14 cm. Point Now we have to draw the line exactly the same way so that we can clearly see that our half up to this point is three, four or five sixth meters.

image.pngimage.png

And then from four point to five point we have to make a million shape and just like that the line that goes from four point to three point is also done by us and just like that. Five and three are the points we have to merge with each other And just like that it can be harvested in our very best way

image.pngimage.png

image.png

Tell me, which of the necks was the most difficult for you to draw?
|
-\

Moa Collar is the most difficult thing for me to cut because I didn't understand how to cut it, and then after taking it and cut it this time. But I didn't find the item right so I tried it again and finally when I saw it for the third time after embroidering it, it is very good bro as I am now in front of you guys. I will also submit that I have seen it cut after taking the garment and you can also see that when we try it on the cloth, it will have a very good shape and texture. It's cooler because it looks good on us, the shirt will look great too

image.pngimage.png

image.png

image.png

Tell me, which one are you going to use for the shirt?

I have to continue using the Moa collar because I had a little difficulty in cutting it so I practiced it again and again and because of the repeated practice it was very easy for me to cut it. Done so it won't take much time for me so I always go to use it and I also like the shape of the collar very much and I will practice it next time too. Will try the same

image.png

Please write your post as if you were teaching the class (that's right, every reader learns something from you) avoid using my exact words, the idea is for your post to be original.

How I made them and how I learned them I have explained very fully and I have tried to do them myself. I can also perform it in a good way and if there is another person who wants to learn by looking at it, then he can easily. Above is the one I have taken the final look and above it my username is written so you can see that I have different types of collars. This is the first time we have tried it now I feel like I can easily apply any collar now, so I also want to thank you.

Special Thanks to @lunasilver

Invite friends: @aaliarubab , @sualeha @shawlin,

Regards: @arinaz08

Sort:  
Loading...

Coin Marketplace

STEEM 0.24
TRX 0.21
JST 0.037
BTC 98171.38
ETH 3402.71
USDT 1.00
SBD 3.36