Is it possible to learn how to repair household appliances yourself?

Any household appliances tend to fail sooner or later. Today, home appliance repair services are a rather expensive pleasure, primarily because instead of repairing a part of a particular unit, they prefer not to bother, but change the entire unit.

An example from personal experience, such as leaving the Sony system camera on charge, as a result, someone from the home pushed it off the table and it hung on the charging wire. As a result, the edge of the system board occurred, where the cable connection connector was soldered off.

I contacted a Sony service center. The repair price is 200$. That is, the cost of the entire motherboard plus work. In other service centers, the price was slightly lower, but this did not change the situation - 150, 185, 190. In all subsequent service centers, they talked about the need to replace the system board. I decided to open the camera myself.

Today on YouTube (and this is the main plus of this video hosting) there are enough videos about repairing a wide variety of equipment - from cameras to internal combustion engines of cars and motorcycles. I found a video describing in what order to open the camera body so as not to break off the clips and plastic guides.

He took off the system board. I glued the edge off myself, reinforced it with epoxy glue and soldered the tracks on the board itself. Checked the contact - the camera connects to the PC and is charging. The repair price is 5$. Compare - 5$ and 200$.

The camera still works reliably, many photos in articles on this channel were taken by this camera. The same story with microwaves, washing machines, electric ovens.

Today you can buy any accessories for any household appliances - from a thermoplate to an electric kettle switch to pumps for a washing machine. It seems that household appliances are complicated, in fact there is nothing to break down there, for example in a microwave oven, electric furnace, washing machine, in addition to a complex electronic control unit (which can only be repaired in specialized workshops), no more than 10-12 main spare parts, only different manufacturers make all nodes with minor changes.

What does it take to learn how to repair household appliances yourself?

Just a few things:

1. Desire. The desire will learn how to fix malfunctions of household appliances and learn new skills. There is a ton of information on the Internet, all the more illustrative.
2. Initial skills in electrical engineering, mechanics, safety. If there are no such skills, you can learn them, including on your own.
3. The tool. Without a tool, you cannot repair household appliances yourself. Screwdrivers and sledgehammers are not enough here, so if you decide to do this, then get ready for the costs associated with acquiring the tool.

And the basic principle that is the foundation of the skill of repairing household appliances on their own is to understand how it works. Understanding this, you can choose the manual you need at https://alotmanuals.com/ and it’s easy to fix everything yourself! If you understand the principle of operation of the device itself, of a separate unit, then you will understand and quickly find the cause of the breakdown. Why is it broken and what is the reason.

The ability to repair household appliances yourself is a very good skill that helps out in a variety of situations and I can tell from experience helps many people.

The main thing is desire. If it is not there, if there is no ability to learn, to think like a mechanic, an electrician, then it is better to abandon this idea.

Bring your faulty home appliances to a service center where exactly the same people work. With hands, head and savvy. A kit that allows you to make money. And today, pretty good