Turning my Garage into a Workshop — Part 2: Painting
Part one here.
You may think this will be the most boring part of my garage to workshop conversion but, my, has it made a difference!
Here's what I used:
Actually the denatured alcohol was for something later...
Taping everything and sheeting the floor took a lot longer than I expected. Maybe three hours.
Prime time!
Next day, finishing off the matte "Ultra White" ceiling topcoat
And then, disaster. I tried to topcoat the ceiling and walls in one day, but it was a bad colour. Nazi grey. I felt sick. I nearly cried.
Tools down and I enjoyed a lovely shower and a sparkling-cold beer.
After that I went on the online to find a new paint colour. Truth-be-told, I was originally going with white. It was my wife who suggested a colour. I balked at her suggestion, mainly because I have huge anxiety about spontaneity; spontanxiety, as I have just decided to call it. For some reason, once I have a plan in my head, any changes to it cause a minor cognitive and emotional breakdown.
It probably stems from childhood when I got excited about things then had my plans dashed against the ground. As an example, I have a strong memory of being maybe nine years old in December. I had sudden festive elation which manifested as me going upstairs and jumping up and down on my bed singing "We Wish You a Merry Christmas!" I was so happy, which I thought would be appreciated at Christmastime. It felt like my emotions and those of my parents had finally synchronised. And then my name was shouted angrily from downstairs. I had done something wrong. I don't know what. It could have been anything from not clearing the draining board, to polishing my father's shoes incorrectly. Whatever it was, it jerked me to my senses. While not a plan, as such, I had experienced an aborted projection of current and future happiness. I would rarely dare to be joyful in that house again.
Once I had recovered from my wife's colour suggestion, I accidentally bought Nazi grey. Home Depot had it on offer, so my choice was made for me. Now I had to choose from the entire colour wheel!
Three hours later I found my saviour:
Crystal. Blue. Waters.
The Home Depot website said I had to wait nearly two weeks to get it! Too long. I phoned my contact and it was in my hands the next day.
Here it is:
Please now enjoy this song:
And now we continue.
My biggest concern with painting was all of the bugs I killed. I tried to save as many as possible. I blew them away, I shooed them with my brushes, I did what I could. But some could not be saved, like this poor critter.
Poseidon rest his soul.
I stood back at this point and nearly cried at the subtle beauty of this blue.
All done.
Just had to remove all the tape and sheeting. Which took AGES!
Had to touch up a few areas where the tape pulled the paint away.
All done.
Epilogue
I felt good about the painting. But there is still much work to do.For one thing, I had missed a patch of topcoat on the floor. I was advised by Legacy Industrial's excellent customer service desk to scuff it up with a green pad, wipe it down with denatured alcohol (there's the callback) and bang on another coat. I did this badly, but I did it, and it was done.
I also applied some heat resistant window film. We have windows in our garage door, unlike most of our neighbors. We wanted some natural light. But in the west-facing afternoon sun, they created shafts of laser-hot terror. The titanium film I applied claims to reduce the heat by up to 72%, and it really does feel different. More like a warm forest glade—an ambient glow for the ages.
This is nice for a garage, but essential for a workshop.
I'm about to order a table saw. See you in part three.
Thanks for reading!
Great post! At my house i changed all the lights, painted, installed a fume hood. This is a great documentation.
Thanks! What’s a fume hood? Over your stove?
Over our new gas range stove.
Lovely stuff.
I like that you looked after as many of the creatures in California as you could.
If you built a CNC router in here would you need to sound-treat the space?
A place in Berlin that had one created a booth-within-a-room to muffle the noise. It worked pretty well.
Anyway, just some thoughts.
If that is a regular-size car, looks like you have enough room for a small production line in that hangar.
A good question regarding CNC. Yes, it is noisy isn't it... I think my options would be to do it seldom, or to soundproof it somehow, yes. One issue is that half of the garage will be used to park a car (a bigger car than the one shown) so my space really is at a premium. I hope to at least get a small CNC machine one day though. X-Carve may be the answer.
Thank you for your thoughts.
Great update. I enjoy reading it. :)
Source
If you plan to use a white/bright interior, than grey would create a nice contrast, but it was a good suggestion to use blue. It looks more friendly.
Yes it does look more friendly :D
It also picks up some of the blue in the floor flakes.
wow watching stuff like this makes me happy you are doing awesome work there :D
Thanks! I'm glad it makes you happy :D
Great and amazing post @lenskonig. You have a lots of knowledge and I appreciate your work. Fantastic shot. Nice content and brilliant post.🤗 I l loved the interior of the house. 🏡
Thanks for sharing this post.
Thank you, @stardivine! Much more to come :D
You're welcome! 😊
@lenskonig You have received a 100% upvote from @getmyroi because this post did not use any bidbots and you have not used bidbots in the last 30 days!
Upvoting this comment will help keep this service running.