Basics on How to Make your own chembuster

Today i will give a short guide on how to make your chembuster.. a chembuster is a device built for the energy know as orgon which was studied by Willhelm Reich. The purpose of a chembuster is to improve the weather in the area it can release clouds so they don't hang over for days without raining and has many beneficial effects... animals are also attracted to it as the chembuster emits good energies.

You will need:

A pail; for this one i used a large margin container. this chembuster is about 4 feet tall and is a smaller one than the regular six feet tall one.

Any type of metal, aluminum, copper, or any metallic shavings, small pieces and chunks

You need liquid resin that hardens when you add the catalyst to it..

Copper pipes; 6 of them for this one i used half inch and about four foot pieces and small pieces that will stick in the resin

Quartz crystals; six of them, good quality (six sided naturally shaped) that will go inside the pipes at the bottom and other crushed pieces of quartz.

And a piece of wood with six holes in it for the pipes; you can use a compass to space the holes properly.

In the pail make a layer about an inch thick of metal shavings and quartz pieces

Then us the short pieces of copper pipe and tape the bottom ends closed and you can add the good quality quartz inside the pipes pointing up.

Use the wood piece with the holes in it to hold it in place.

Then fill up the rest of the pail around it with metal shavings and quartz pieces.

Next mix the resin with the catalyst and slowly fill up the container until it's full.

Let it cure for a day best if it's outside because the fumes are really bad for you.

I added one large quartz rock in the middle of the pipes half in the resin.

Add the long pipes to it and find a place to put it where the bottom touches the grounds nicely.

That's all till next time.