Trouser drawing and cutting,back [email protected]% to skillshare

Sorry for making this post late,i was preoccupied with works which include taking care of my sick mother.so let get down to business,today lesson has to do with back side of trouser cutting,if you have nt followed my previous post about the front cutting,do well to review it and please upvote the post thanks.,👇👇👇

https://steemit.com/hive-197809/@ndufirst/trouser-drawing-and-cutting-lesson-one-ndufirst-10-payout-goes-to-steemskillshare

Today lesson will focus on the back side. Having cut the front,you need to carry the material and put it on top of the remaining foded material,like this👇👇

When you are done placing it in top,make sure you give space at the front of the remaining material for you to be able to cut the back,drawing the line ,following the same line draw at the front,.
This is what i mean👇👇👇👇👇

When you are done,put 1" at the front of the drop of the trouser for sawing allowance because if you did not out it,your work wont look ok,after adding 1", draw the line down to the drop👇👇👇

Having done that,you having to starting adding 1" on top of the front trouser inorder for you to get the back shape,and that us exactly what you will see me doing, i will add 1" starting from the drop to the bending length.always remember that before you remove the 1" ,you need to put your tape from the length of the front and remove that 1", then measure from the 1" to the end of the front,anything you got,put what you got to the 1" you have remove and measure your normal length,that is what you are going to do to all the three space,that is from your drop to your bending length,
the 👇👇👇👇

When you are done,join everything ,
in joining,make sure you use carved rular
So as to get the needed shape of a trouser,when you are done joining,this is what you will get👇👇👇👇

Before cutting,make sure you have taking your time to check what you draw to make sure you got it right,,then cut your trouse,make sure you cut from line 👇👇👇👇

When you are done cutting,there is one important thing you need to have in mind if you really want to get strieght trouser.once you are done with the cutting,fode the mouth of the drop ontop of the front trouser to cut off the allowance that exist because if not so,you will have problem at the end of the sewing though the problem may not be too obvious to people but still,you need to do that,this is what i mean 👇👇👇👇👇

Your trouser is ready to be joined right way.i hope my lesson is pratical and understandable,if you like what you are learning,encourage me by upvoting and commenting.
Thanks so much.my next will be on;
HOW TO DRAW AND CUT SENATOR SUIT

Special thanks to:
@steemcurators
@milakz
@steemskillshare