"Let's do some creativity- WEEK 1 (Construction of Two Seater Couch Using Waste Carton & waste Fabric Material)".

Greetings friends! How are you, your work and your family today? I believe everything is fine as I am. I am so happy to participate in this contest. Cudos to @jyoti-thelight for organising this beautiful contest. Today, I am entering into this contest with a beautiful craft of A two-seater couch formed out of waste carton and waste fabric material. Go through the article gradually as the details of the construction are unfolded.

Materials Used For Construction

• Carton
• Fabric material
• Evostik gum
• Scissors
• paper cutter
• Beads
• Biro
• fabric mesh
• Ruler
• form

Step 1
I began my construction from the seat of the couch. Here, I measured the frame of the seat to be 4 inches by 8 inches, where 1 inch from the 4 inches is the seater of the couch back. I also took two measurements of 1 inch by 8 inches and then 1 inch by 4 inches. After the measurement, I cut them out using a paper cutter.

Step 2
At this step, I gummed all the cartons cut in step one to form the frame of the seat.

Step 3
I measured the fabric materials to be 6 inches by 9 inches and I used it to cover the frame of the seat. By this, the seat of the couch is formed.

Step 4
I took measurements for the back of the couch. I measured my carton to be 4 inches by 8 inches, and I curved the top to form a two-seater couch back. I duplicate it. I also measure a 1-inch by 15-inch carton. After this measurement, I cut them out using scissors and paper cutter

Step 5
Here, I assembled all the measurements taken in step four above to form the frame of the couch back.

Step 6
I covered the frame with a fabric material and with this, the back of the couch is formed.

Step 7
At this step, I connect the seat and the back of the couch together with the help of Evostik gum. Finally, at this step, I gummed a black and white weave material at the edges of the couch.

Edited using GridArt

Step 8
I formed the frame of the arm of the chair. At first, I drew how I wanted the arm to be on a carton. I cut it out and duplicated it into four so that each arm would carry two. I also cut another carton measuring 4 inches wide. I peeled one of the sides and then gummed the design of the arm at the edges of the 4-inch wide carton with Evostik gum.

Step 9
I covered the frame formed in step 8 above with fabric material. Finally, I gummed a black and white weave material at the edges of the arm.

Step 10
I gummed the arm and the seat together using Evostik gum.

Step 11
I cut a carton to be 4 inches by 8 inches and then gum it under the couch. I then gummed four big beads at each angle to form the legs of the couch. Finally, at this stage, I gummed the black-and-white weave material at the edges.

Step 12
I formed throw pillows with a form and fabric material. I just cut the form and then cut a fabric material that can cover it. I then covered the form with the fabric material using evostik gum and finally, I gummed the black and white weave material around the throw pillows

Step 13
I gummed a fabric mesh on the back of the couch to show that it is a two-seater couch and then placed the throw pillows on the couch

My Selfie

Conclusion
Honestly, I am glad to have this craft presented, and I am sure that with these details, any other person can replicate it. I have the honour of inviting @okere-blessing, @mhizta @uzma4882, @xkool24, and @ninapenda to also create something for this contest.

Cc
@jyoti-thelight

10% beneficiary support to @hindwhale

THANK YOU ALL