How I make CBD oil for less than 50% of retail

Taking CBD oil for me was too expensive. So, I figured out a cheaper way.

I tried out a bunch of different CBD brands, and I love CBD. However, the biggest problem I have is that it is way to expensive. Most of these bottles with labels are over 50 bucks. Some like the CWhemp bottle in the middle runs around $150. I needed a way to cut the cost.

Initial Investment cost

All the things I needed when I first started. Please note that I did switch to the larger isolate package after figuring out what I was doing.

Price	Item
$7.94	Funnel
$8.27	Spoon
$21.45	Scale
$10.99	Bottles
$9.85	Gloves
$45.00	1500mg CBD Isolate
$26.55	MCT Oil
$130.06	Total

Cost breakdown per tincture after initial investments

This is what it now costs me per tincture.

Cost	Item
$41.25	1500mg CBD isolate*
$0.92	1oz Glass bottle
$0.83	MCT Oil per oz
$43.00	Total per tincture

*I now buy in "bulk" and buy the 14 gram size to also save a few bucks on costs.

Going from 100-150 dollars down to less that $50.00 per 1oz tincture was huge savings. I have links to everything I use below.

FDA Disclaimer:
These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

Personal Disclaimer:
I take CBD oil for my personal ailments. I do not sell my oil, and do not advise anyone else to do so. I also do not even allow friends to sample the oil that I make. I just provide them the information on what I did to make my personal oil.

Legal Disclaimer:
You need to follow the laws in your state as to whether or not you can buy or own CBD oil. At the time of this writing there was a moratorium on banning CBD oil in my state. Which is why I'm writing this now. Any laws that they could pass. Do have the possibility of changing the legality status of this post.

Do your own research

I can't stress this enough. Since CBD is not evaluated at this time by the FDA (even though there are trials for some CBD drugs). You have to dig into researching everything about what you are going to put in your body. Project CBD is probably the best place to start. However, my article here can be used to at least get you started in the direction for personal research.

Experiment For Proper Dosage

Before making your own CBD oil. I would highly encourage you to try out multiple brands, and strengths to find out what dosage is best for you. The main reason I advise doing this, is that the vendors are in essence the control in the experiment.

Here are my recommendations for where you might want to start:

https://www.thecbdistillery.com/
This is my preferred vendor. This is also where I get my isolate powder in bulk to make my CBD oil.

https://www.cwhemp.com/
They have the best quality out of all the CBD oils I have tried. However, there is a rather large associated price tag with going with cwhemp.

https://www.diamondcbd.com/
If you can infuse it with CBD, these folks do it. They have everything under the sun CBD you could possibly want. They are my preferred gummy vendor when I can find a sale. They also provide a 0% THC CBD oil.

https://realscientifichempoil.com/
Larger company with decent products. I still like the above companies a little bit better.

There are a number or other great companies out there. These are the ones I just tend to gravitate to.

The Purchase

Here is a list of items that I use, and uses. This is where my larger initial investment came in. However, buying these things easily makes up their cost.

Equipment	Use
Chemglass CG-1983-12 Micro Spoon Spatula	Allows you to spoon isolate powder on to scale.
American Weigh Scales GEMINI-20 Portable MilliGram Scale	Precise scale for measuring powder.
Liberty Glove – Duraskin - T2010W Nitrile Industrial Glove	Gloves stop hands from contaminating tincture mixture.
Norpro Stainless Steel Funnels, Set of 3	Funnel allows MCT oil, and CBD isolate to pour in easier.
12, Cobalt Blue, 1 oz, Glass Bottles, with Glass Eye Droppers	Glass vials to store tinctures. Would not go with larger than 1oz (30ml).

The consumables are pretty variable.

Consumables	Use
99+% Pure CBD Isolate Powder from Hemp	I buy the 14 gram size, because it cuts my costs by another couple of bucks for the year.
Premium MCT Oil derived only from Coconut Oil	Any well reviewed brand of MCT oil should work. These are the ones I have used.

Safety First

I highly recommend wearing gloves for the majority of the entire process. Not to protect skin from anything, but to make sure that the CBD oil mixture does not get contaminated. Since the mixture is being created at home in my kitchen. It is imperative that everything be as clean as it can be. I also only advise using no larger than a 30 ml bottle. I attempted this process with a 60ml bottle, and after awhile the CBD mixture became cloudy. It should not be cloudy. It should be clear after the isolate dissolves.

Before I begin, I make sure that everything is washed. Except possibly the bottles, because they normally are wrapped when I receive them. Here are some picture to outline that which a is a pretty basic process.

As you can see the funnel, and the tray for the scale still have a bunch of crud on them.

I normally just throw them into a mixing bowl. Fill the bowl with hot soapy water. Scrub the crap out of them.
holding soapy things picture]

After I have scrubbed. I dry my hands, and throw some gloves on. At that point, I rinse everything as well as possible, and dry it off. As you can see here. My equipment is in way better shape than when I started off.

Get To Measuring!

This is what Iyou will be measuring.

I set up my scale like the picture the way I have it below. The added 10 gram weight allows for the scale to measure more precisely. When dealing in milligrams this is essential.

After I have it set up. I, turn it on, and zero it out.

I start taking my CBD isolate, and with the little spoon pour it around the weight on the scale. Until I have deposited my dosage. The most effective dosage for me right now is the 1500mg 1oz bottles. Please do note that if I am pouring anything over 500mg. I will have to make a small pile around the weight. This is when I need to be the most careful not to sneeze or breath heavy.

Mixing Process

After I measure out the amount of isolate that I use. I start by preparing the bottle for the powder. The first thing I do is put the funnel in, and fill the bottle that I am using with 10-15% MCT oil.

I do this to make sure that the funnel is lubricated, and that there is some liquid at the bottom of the bottle to absorb the isolate powder when it gets added.

After that I remove the additional weight that was on the scale pour the CBD isolate into the funnel.

Once the cbd isolate is in the funnel. I make sure that the funnel opening is clear like I have in the photos above. Just to make sure that the oil will pour down in the next step.

I SLOWLY pour the MCT oil in a circular fashion on top of the isolate powder.

As I pour the MCT oil. It will grab the isolate powder, and pull it down into the tincture. By the time I get most the bottle filled. The majority of the isolate powder should be in the bottle, and not the funnel.

If I do have a good amount of powder left in. One thing I do is take the dropper that comes with the bottle, and grab some of the oil that is already in the tincture with the dropper. Then just apply the oil to the funnel repeatedly until the remainder of the isolate powder is removed from the funnel.

Mix And Check

Now I just need to screw the dropper on, and shake the oil slightly. Just enough to agitate it, and distribute the the isolate powder in the oil.

After I have shaken. I do a quick check with the dropper. If my dropper looks like I have below. I know I need to shake just a little more. Not much though.

When I check the dropper it should look like this.

Then I just let it sit for a few hours.

Final Product

After a couple hours I check with the dropper again, and make sure that it runs clear. If it runs clear even after a few more shakes. I know that the isolate powder has been dissolved in the MCT oil.

I'm then done, and ready to take my oil!

---

Final thoughts

If you found this informational, and might be able to help anyone who is taking CBD oil, but might find it to expensive. Please make sure to share, and do all those Steem things that can help get the info to the largest audience.

Here are some informational links on CBD:
How CBD Works
Conditions that CBD can help