Devil Gundam: Toes Clean Up [Leg Modification - Part 131]
Hi guys!
Today, I will clean up the toes I worked yesterday. So here are updates on Project Devil Gundam!
Today, I will clean up the toes I worked yesterday. So here are updates on Project Devil Gundam!
Removing the Excess and More Clean Up
![](https://steemitimages.com/640x0/https://cdn.steemitimages.com/DQmamPgGeJ5KAukZePoSMAzBu3WTS6bScrJuTQ9FJVHrbXL/IMG_20180601_115158.jpg)
The cement has cured overnight so I can start removing the excess pla plate.
![](https://steemitimages.com/640x0/https://cdn.steemitimages.com/DQmNYazmKvuAgfzBgJ7hqnCxtinSrBacwqwekXu5qxAw7gh/IMG_20180601_115807.jpg)
I start by slowly filing the pla plate at an angle. Notice how the pla plate is slowly getting thinner at an angle similar with the original surface.
![](https://steemitimages.com/640x0/https://cdn.steemitimages.com/DQmY5c4FWckRVWNBEUwCPicT8RnZQbeVsQz14yiPR6zq8Yz/IMG_20180601_120445.jpg)
I just keep filing until there is no more gap in between the original plastic and the pla plate.
![](https://steemitimages.com/640x0/https://cdn.steemitimages.com/DQmcy3TM6sRJ3R3m6TnZXaE96KCqEJt2GMBvah8sYWVhGEk/IMG_20180601_120504.jpg)
Here is another before and after picture.
![](https://steemitimages.com/640x0/https://cdn.steemitimages.com/DQmNtFP4mgmf9ymGGAMv9kDpHLsUGx2KzP4x95jcCEamyVr/IMG_20180601_122454.jpg)
Some of them still has gaps or holes so I just patch them up with scrap pla plates and repeat the process tomorrow.
![](https://steemitimages.com/640x0/https://cdn.steemitimages.com/DQmVdyN835VBppQei2LLwoWubNWrEon4irW6MBgeSV7Ejgc/IMG_20180601_132151.jpg)
Now, this one I already adjust it again with file and hobby knife.
![](https://steemitimages.com/640x0/https://cdn.steemitimages.com/DQmdmSbsuYrtvsoQJ1k7AWnGPgKdASkdn1AKU68VqXmWL4i/IMG_20180601_132210.jpg)
Here is a quick test fit with the inner frame.
![](https://steemitimages.com/640x0/https://cdn.steemitimages.com/DQmdWxiYeW3dDVUB9veQDVZMMdFe6EFREXsSC8sFExNurfU/IMG_20180601_132453.jpg)
Here is another quick fix.
![](https://steemitimages.com/640x0/https://cdn.steemitimages.com/DQmckkpobve1jBaUM6AVAoq3onVs9FDaP2T748vtRGfoiqs/IMG_20180601_134340.jpg)
And here is another toe after clean up.
So these are my update on Project Devil Gundam for today.
Keep on steeming! Have a nice day!
Quick access tutorial:
- Fixing broken peg using gunpla runer and several tools.
- Fixing holes using cement and plastic scraps.
- Making C-Joints using pla plates.
Congratulations @devytan! You have completed the following achievement on Steemit and have been rewarded with new badge(s) :
Click on the badge to view your Board of Honor.
If you no longer want to receive notifications, reply to this comment with the word
STOP
To support your work, I also upvoted your post!