About the Garden Towers

There are currently four styles of Garden Towers to choose from. These pieces are hand-crafted by the artist and individual differences will occur from piece to piece within each style. Please understand that you are purchasing a style of tower, not the exact tower shown in the Garden Tower Catalog.

There is some assembly necessary after receiving your Garden Tower. Each package will weigh approximately 45 lbs., so you may want a helping hand in moving and opening the shipping container. Only two hand tools are needed: a Phillips-head screw driver, and a 9/16th or adjustable crescent wrench.

Open the shipping container by removing the screws holding the ends of the container in place.

Remove the tower, the stone base and the lag screws with washers. Remember, the sandstone base is quite heavy.

Bolt the pre-drilled sandstone base to the tower legs using the lag screw and washers. Tighten to a light to medium hand pressure. Tight, but not "gorilla tight."

That's it, your Garden Tower is ready for placement in you home, patio, lanai, or garden. No sealing or other preparation is necessary. If installing in your garden, a level spot to put the base is needed. You might even want to "set" the base so that the ground level is even with the top of the base.