If you want to catch big fish, first learn to change the swivel on the fishing gear.

Autumn and winter finally comes, most of the fish kept their fat,  and the season for big fish had already come. But have the fishermen ever encountered a fish that was about to come in and escaped by it? Who meets this  can not be crazy! Just as "I walked away gently, just as I came gently ..."  Haha, it seemed like he was being ridiculed by a fish. However, what we don't  know is that the “swivel” of the universal wheel on our equipment needs to be  changed, so that the fish can get bored. Today in this issue, let's talk about  why you need to change the ring when fishing for big fish, and how to change it.  I hope everyone will learn something after learning. 

First, the universal swivel ring is easy to fall off. You must replace it if  you want to catch big fish. 

Because the swivel we use is glued with glue such as 101 or 502, it takes a  long time, and it is particularly easy to fall off naturally. If you just meet  the big fish hook at this joint, the escape rate is 100%, no luck.  Psychological, nothing more than remorse. 

Second, how to properly replace the swivel. 

Step 1: Prepare tools: universal fishing ring, lighter, 101 or 502 glue, or  good glue from brother. These are relatively common materials, usually around,  universal fishing rings can be bought at Taobao or fishing gear stores. You can  also use a hollow red rope 6 to 10 cm long. 

Step 2: Take out the rod that needs to be modified, and use a lighter to bake  the iron of the old universal wheel. After the heat expands, the glue will be  melted. You can pull it out just by pulling it out. . 

Step 3: Take out the sandpaper and polish the overlapped part of the rod  slightly with the length of the universal swivel to be installed, and polish  away the remaining glue and the paint on the fishing rod. This treatment can  help the bonding be stronger. In addition, reserve an additional 3 cm of  application glue length, which is the installation length of the universal  swivel ring plus 3 cm of application water. After these sanding is completed,  take out the prepared universal fishing swivels and install it. 

Step 4: Apply 502 or 101 glue to the tip of the rod and rotate the universal  swivel ring. When installing, pay attention to adjust the overall concentricity of the universal swivel ring and the tip of the rod. After adjustment, you can  apply glue to the top. Be sure to apply Apply it evenly while rotating, wait  until the glue has solidified, and then lightly sand it with sandpaper, put it  in a cool, ventilated place, and let it solidify slowly. After 24 hours, tie the  rope and tie a fishing line. Pull it to see if the bonding is firm, and you're  done!