Hello friend of farms today I will show you how to make a hand vacuum with recycled material. This project was developed in order to use alternative energy at home and can create household appliances with recycled material that can be useful for our home as is the creation of a homemade vacuum cleaner.
In the cleaning of the home there are some corners or surfaces that are usually difficult to clean well. This happens, for example, with carpets or surfaces where hairs and lint accumulate that can bring some respiratory problems for those who live there, due to the accumulation of mites.
Appliances are often expensive and consume a lot of energy. Therefore, you can learn to make a homemade and inexpensive alternative that, by reusing some materials that you can find without much difficulty, will allow you to create a small homemade vacuum to clean all the surfaces of your home.
A homemade vacuum cleaner can be quite useful for many things. For example, for the seats, it is a good car cleaner. When we want to vacuum the most difficult areas to arrive with a normal vacuum cleaner, this homemade vacuum cleaner will be our great ally.
It will serve as a homemade vacuum for the computer keyboard. In the pc keyboards are accumulating traces of dust and dirt, so it is convenient to vacuum them from time to time.

THEN SPECIFY THE MATERIAL

OF THE STEP BY STEP:

4.- After we have completed the blade we will place the paddles on the motor shaft and with the other pieces of cardboard we will make a kind of box by gluing it with silicone and sealing all holes leaving only a quadrant that will be placed there. bottle. Then finished this we put the other lid of the cardboard with the largest hole and verify that the blade rotates properly that does not stick.

5.- We take the bottle we grab the lid of the bottle and we make them a box on the lid with a blade. This lid is placed right in the square that was left of the turbine box and we stick with silicone sealing all holes.
6.- With a needle we will make a hole in a part of the plastic bottle that will serve as a filter. We take a piece of cardboard in the form of a long rectangle and we will give it a circular shape with the help of a lid, we will join it in the tip with silicone and then that semi-cube is placed in the part of the big fire that has the drawer of the turbine. silicone and some teeth are made to circulate the air better in the turbine.
7.-We put the plastic bottle to the lid.

8.- We make a connection in series with all the electrical components using the tin to connect the cables to the motor, the damper and the battery holder. Once having all the corresponding connections, we will place the batteries in a battery holder and turn them on.

The materials used are recycled, so as not to spend a lot of money on the economic part. Use other motorcycles of greater strength to be able to absorb more weight. Find another source of energy that can help consume natural energy. At home we can all build this simple and simple material.

CONCLUSION

In this project some recycled materials were used and for its preparation you need concentration and skill after observing this experiment if you could do it at home.
Thanks for taking a few minutes to read my article
Sources: The photos are taken by my cell phone.