Solar power project step 4, testing the self powered brain, a Photon Particle microcontroller
Part 3: Solar power project step 3, circuit designs for charging / power out switch for continuous(ish) use, and new batteries
Part 2: Solar power project step 2, battery test with inverter
Part 1: initial purchase and testing
Before I go on I wanted to test out the "brain" of the project which will make it smart and connected to apps and so on. For this I chose a microcontroller that I've tried before to great success, a Particle Photon.
The Photon is a WiFi connected microcontroller, very similar to the famous Arduino. That means that it works at 3.3v (Arduinos also come in 5v but not the Photon), has multiple input / output pins, including some built in pull up / down resistors, and specialised data line pins.
However the thing that differentiates it from the competition in Arduino, Teensy and so on, is that it is WiFi enabled and integrated with Particle's cloud service out of the box. You can set it up just using their Android or iOS app within a couple of minutes and tinker with it using the default firmware binary called ... Tinker! It listens to cloud commands to turn pins on or off, or listen to them for input.
They also seem like a really great company in general. Watch their slightly awkward ad for this their new mesh networking microcontroller project (which I'm very excited about too incidently):
The self powered brain
My hope is that I can use a LiPoly battery, a small 4W solar panel and a charging regulator with the Photon to allow it to be completely self powered. I imagine that as a back up or boost power it can be powered and charge off the bigger lead acid batteries too, but as far as possible off the sun, just like the rest of the solar charging system.
I wrote a simple program from the Photon device firmware that recorded the battery value every 5 minutes to see how the charge was going, and also to check it for power usage, as by default it is in regular contact with the Particle cloud network via WiFi which obviously takes non-trivial amounts of power.
It charged very well, if quite slowly, so I was happy with the results. I also left it on overnight. It did get right down to about 5% battery, and then level and start rising in the morning. That was only because it sunny which was lucky, but it's good to know that it will drain fast in the night.
There are a lot of things I can do to reduce power consumption, but turning off cloud connectivity sometimes, or idling it, etc. so there's a lot of scope for optimisation. The firmware libraries and APIs are very flexible and I'm looking forward to diving into them further.
Other work in preparation for system building.
I also filled in a gap in the tool box top casing using some wood I had lying around. The colours happened to match so it wouldn't look too weird. The grooves are their for screws and nails and things, but I'd prefer for the surface to be as level as possible.
By my guess I'm going to need a good amount of cable, and unlike the diagrams I made I need them to be coloured our I'm going to get really confused. Best thing for it was to recycle as much power cable as I could from things I'm throwing out anyway. I also had to sacrifice an extension board cable, but that's ok, I have several of them, and I can always rebuild it.
Next, to build
I'm really going to build it next time, I have the stuff prepared and it's just a case of wiring it. It will take a lot of fiddly work but it will be worth it.
Make a copy of your diagram. As you make each connection, put a small mark across the wire at that end. When you do the other end connection mark it too. When all wires are marked off, you are finished.
:DThanks man, I ended up doing something very similar to that.
Thanks man, I ended
Up doing something very
Similar to that.
- fourth
I'm a bot. I detect haiku.
Cute, this bot is fun.
:)Glad you got it done! A finished project is a satisfying thing. Enjoy!
:)Join our Discord Channel to connect with us and nominate your own or somebody else's posts in our review channel.
Help us to reward you for making it ! Join our voting trail or delegate steem power to the community account.
Your post is also presented on the community website www.steemmakers.com where you can find other selected content.
If you like our work, please consider upvoting this comment to support the growth of our community. Thank you.
Thanks so much guys, I'm really happy you found my post and I got to discover about your group, it looks like something I would be interested in participating in.
Excellent post
The human being always looking to have the comfort that allows it, the guarantee of a life in harmony, with the existing advances, has made indispensable the electrical energy in its environment. Therefore, the importance of using electronic devices to fill the needs that invade the being and in many cases be in tune with the modern world. However, you can still find cities, towns, localities, away from modernism and therefore lacking the service, using even rudimentary means that allow them to favor their needs.
It is a kind of module that aims to try to take advantage of the greater amount of energy that comes from solar radiation. The term used to define it comes from solar collectors, which were used to obtain hot water, commonly for domestic purposes and photovoltaic panels used to generate electricity. With regard to these photovoltaic panels, it is important to note that they are formed by a few cells that are responsible for converting light into electricity. These same cells are also known as photovoltaic cells, which means "light-electricity". These are dependent on the photovoltaic effect, in order to transform the energy of the Sun, and in this way make a current pass between two plates with opposite electrical charges.
The ecological energies are more profitable than the energy produced by fossil fuels, because they are inexhaustible. The lack of interest or ignorance towards this type of alternative energy, by public and private entities has led to a huge global backwardness, because with this well-known green energy can be resolved irregularities that occur daily with the use of electric power. The photovoltaic energy is a type of energy that if it started to explode in a massive way could obtain an electrical improvement for the whole world.