3D Hologram Projector (DIY)
First of all sorry for the low quality I didn't had the proper tools. Ok let's start now.
Well every one has these holographic projector in movies and envied them, but now you can have your own and its really simple to make one.
Following is the stuff you need to make your own Hologram Projector.
Equipment
- Lead Pencil(Just to draw the outlines)
- Knife (Or what ever do you think is good for cutting plastic if you have hot knife that would make things a lot easier)
- A paper (To draw outlines)
- Some Plastic pieces Or Glass but its hard to cut glass (I used old CD covers you can use any plastic pieces But it should be scratch less as mine had some scratches.)
- A Protractor(To measure the angle of both lines)
Outline
So now let's draw the basic outline on the paper I use angle 120 depending on how big or small you want it be you can change the angle.
Cutting the outline
Now cut out the outline that you have drawn on your paper.
After that place the outline on plastic piece.
After this draw the outline on the plastic piece, it should look something like this.
Plastic Cutting
Here comes the hard part well for me it was now that you have your outline start cutting remember patience is the key here just do it slowly.Well if it does not turn out very good you still have the paper outline that you can use to fix this one.
You can use sand paper to get rid of rough edges.
Now you can use this one as an outline to cut others.
You need 4 of them in total.
Again get rid of the rough edges, now that you have all four of them is good shape you are good to proceed to next step.
There are two ways to do this step you can either use glue or tape.
Here is the video for the final results Hope you enjoy sorry for the low quality once again as my plastic pieces were scratched. And I did not had proper tools.
Upvoted on behalf of @thehumanbot and it's allies for writing this great original content. Do not use bid bots for at least 1-2 days, as your post may get picked up by top curators.
Great Original Works are rewarded by top Curators.If you like this initiative, you can follow me in SteemAuto and upvote the posts, that I upvote.
And remember to do some charity when you are rich by contributing to me.If you have any concerns or feedback with my way of operation, raise it with @sanmi , my operator who is freaking in Steemit chat or discord most of the time.
Congratulations! This post has been upvoted from the communal account, @minnowsupport, by Shahab from the Minnow Support Project. It's a witness project run by aggroed, ausbitbank, teamsteem, theprophet0, someguy123, neoxian, followbtcnews, and netuoso. The goal is to help Steemit grow by supporting Minnows. Please find us at the Peace, Abundance, and Liberty Network (PALnet) Discord Channel. It's a completely public and open space to all members of the Steemit community who voluntarily choose to be there.
If you would like to delegate to the Minnow Support Project you can do so by clicking on the following links: 50SP, 100SP, 250SP, 500SP, 1000SP, 5000SP.
Be sure to leave at least 50SP undelegated on your account.
Congratulations @shahab3211! You have completed some achievement on Steemit and have been rewarded with new badge(s) :
Click on any badge to view your own Board of Honor on SteemitBoard.
For more information about SteemitBoard, click here
If you no longer want to receive notifications, reply to this comment with the word
STOPThis is so amazing and actually pretty simple to make. I should make my own but I'm not sure what I should project? A cookie? Glass of wine?