8 Causes of Car Brakes to Be Blong
Single Accident Occurred on Jalan Gatot Subroto, allegedly his brakes wrong
Brakes are the most important and most important vehicle security feature. Any slight damage or performance imperfections on the driver's and passenger's brakes can be at stake.
One of the 'horror' in driving is a blong brake, so the car continues to go even though the brake pedal has been trampled as deep and as strong as possible. To avoid it, keep in mind that there are eight things that can cause this to happen.
brake blong.
Here are the things, as quoted from the official online page of AC Rotary Bintaro workshop.
- Brake Oil Out
Useful brake fluid to apply pressure on the piston or caliper in order to press brake canvas to the maximum. Therefore, regularly check oil regularly, for example once a week.
Brake fluid is reduced drastically, let alone to below the minimum limit, also indicates there is nothing wrong on the components of the brakes or the legs, so it must be directly taken to the garage.
2. Aus Brake Canvas 
)
Brushed brake canvas are usually marked by symptoms of 'snoring' each time the brake. Ausnya official canvas itself only occurs on certain cars that have been equipped with an indicator plate. This condition should not be allowed to drag on and brake canvas should be replaced immediately.
Piston Brake Damage
The damaged brake piston makes it no longer able to continue the hydraulic pressure of the pedal to squeeze the canvas. Impact, braking system stalled or even no longer work. Brake piston damage is usually caused by wear or rust.Piston Seal Master Cylinder Damage
The use of old brakes without routine servicing and the use of unqualified brake fluids cause the breakdown of this component. Therefore, never forget to obey the regular service schedule plus use a good brake fluid.
5. Leaking Braking System 
)
There are two places in the braking system that usually have a leakage master brake or brake line hoses. Leakage is usually caused by the use of long and heavy brakes continuously without a rest break, or because it is not treated with periodic servicing for a long time.
- Stuffed Brake Oil Hose
Brake oil hoses can be clogged by dirt that may enter when filling brake fluid. Dirt can also enter from the reservoir tank. Clean the brake hose regularly.
7. Dirty Brake Oil 
)
Brake hose oil blockage can also be caused by the quality of the brake fluid itself. Petrol oil is very easy to settle and the sediment can be turned into debris debris.8. Vapor Lock 
)
Vapor lock is a term for a condition when brake fluid evaporates. This can happen because the engine is too hot so the brake oil boils and air bubbles appear in the braking system. Air bubbles that will eventually settle and the performance of the1. item car is no longer the maximum. The poor quality of brake fluid is also another cause of vapor lock.if you like do not forget like / upute ... to give the spirit .. to display useful articles ... without you guys we are nothing.
Thak you for what see... happy nice day alaways...
Regarding the discussion on the causes of car brakes malfunctioning, it's crucial to consider various factors. From worn-out brake pads and rotors to brake fluid contamination or air in the brake lines, these issues can significantly affect braking performance and safety. Regular maintenance and timely replacement of brake components are essential to prevent accidents and ensure smooth operation. For those looking for quality brake fluid, I highly recommend checking out https://megaservice.by/shop/tormoznaya-zhidkost/. They offer a wide range of brake fluids suitable for different vehicles, ensuring optimal braking performance and reliability. Don't overlook the importance of proper maintenance and quality products when it comes to your vehicle's brakes!