Antminer Z9 Mini - OpenBenchWoodCube - ! Overclock and Firmware – News !
After many hours of testing, I finally found a firmware that works.
I currently use "Antminer-Z9-Mini-NAND-500M-201808311812-unlocked-factory.tar.gz" firmware.
When booting all 4 hashboards are detected. Unfortunately, not everything is displayed correctly in the web interface. There are missing temperature values, hashboard values and fan values.
But that is not a problem, I connected via ssh to the miner and have there manually by:
cgminer-api -o stats | sed 's/,/\n/g' | grep 'temp1=|temp2=|temp3=|temp4=|temp2_1=|temp2_2=|temp2_3=|temp2_4=|fan1=|fan2=|chain_acs1=|chain_acs2=|chain_acs3=|chain_acs4=|chain_rate1=|chain_rate2=|chain_rate3=|chain_rate4'
By using "grep" I was able to read out the real hardware values.
The next step is the customization of Bitman's web interface, so that all values can be viewed there in the future. Currently it runs slightly overclocked (587mhz). Performance currently about 15.5-17.7 ksols. Stable!
I will contact you again with new results.
Let it all go well.
Happy Mining to YOU all!
Greets @cursedmining and "EFUDD" (https://bitcointalk.org/index.php?action=profile;u=2271429) from @bitcointalk.org thanks for your Support!!
Run Baby Run !!
Congratulations @cryptompminer! You have completed the following achievement on the Steem blockchain and have been rewarded with new badge(s) :
You can view your badges on your Steem Board and compare to others on the Steem Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOPDo not miss the last post from @steemitboard:
Vote for @Steemitboard as a witness to get one more award and increased upvotes!