My Electronics Tools and Their Uses—How Do I Work?

_{Assalamualaikum Everyone. I am @imranhassan
From #Bangladesh}

Edited with Canva.

How are you all? I hope you are well. By the grace of God, I am also well. Today I have come to share with you that working with electronics is both my hobby and my profession. I design, repair, and test various types of circuits. For this, I always have some important tools with me. In this post, I will discuss with you in detail the electronics tools in my collection and how I use them.

To open the cover of an electronic device, to connect various parts during circuit board repair, to remove old screws and install new ones.

✅ Why is it useful for me? It is needed for almost every electronic task. Without a screwdriver, no circuit can be fixed and cannot be opened or installed.

How do I use it? I use a glue gun to fix the wires of a circuit board, to fix the battery connection or plastic part, to set LED lights, to fix Using it, the wires and components do not move. It dries quickly, so the work can be completed quickly.

How do I use it? Soldering iron is used to connect new components to the circuit board and fix old circuits. To make battery charging circuits. And to connect many other different things.

✅ Why is it useful for me? No electronics work is possible without it. Strong and long-lasting connections can be made.

How do I use it? To connect wires and circuit boards while soldering and to increase the durability of the repaired part.

✅ Why is it useful for me? Ensures good quality connections. If you do not solder correctly, the circuit will not work. And there are many types of solder wire available in the market, but it is always much easier to work if you take a very thin type.

How do I use it? To keep wires and circuits clean while soldering. To make the connection stronger. Many times while soldering, you will find that you are unable to join it on the circuit board in any way, maybe a wire or a component. If you use this flux paste in that place, it will hold the solder very quickly, and the solder wire will melt and sit permanently in that place.

✅ Why is it useful for me? Soldering is better with its use. It makes it easier to install components in the circuit.

How do I use it? To check if there is voltage on the circuit board and to see if the AC/DC power supply is working properly.

✅ Why is it useful for me? It is important to check with it before working on power lines. It can check for short circuits, thus avoiding accidents. If you do not use a tester while working with current, you may have a hundred percent risk of death.

How do I use it? To make small holes in circuit boards and to fit charging ports or LED lights.

✅ Why is it useful for me? It is very important to make holes of the right size in PCBs or small devices. Sometimes small work is also needed in plastic or aluminium.

How do I use a lithium battery? I use it in LED lights, charger fans, and small projects. It is needed to run various remotes and sensors

✅ Why is it useful for me? It can provide long-lasting power supply. It can be charged, so you don't have to buy it again and again.

How do I use it? Series board is very useful when working by connecting multiple current lines, such as soldering iron glue gun power supply and other small devices.

✅ Why is it useful for me?

Multiple current lines can be used together. Because it works in a system like switching through a 100-watt halogen lamp. And if something short-circuits, the 100-watt lamp lights up and nothing explodes, so it is useful.

How do I use it? It can be used to run LED lights and check if the power supply of the device is OK and when the voltage is needed.

✅ Why is it useful for me?

I can do small electronics projects. It is useful for making lamps or chargers.

I work with electronic circuits, where resistance and capacitors are very important components. I use them in various daily projects.

✅Resistance

Resistance controls the flow of current and protects the circuit. I usually use it for LED circuits, power supplies, and voltage drops. It is easy to control the work of the circuit through different types of resistance.

✅Capacitor

The capacitor can hold charge and release it as needed. It is used in filtering, power supply stabilisation, and motor starting circuits. I use capacitors of different microfarads in my projects, which increase the performance of the circuit.

To make electronic work easier, I use a tool box, where I keep the tools I need. It is essential for my daily work.

I use all this equipment and tools to make various circuits, do electronics projects, repair, and test. To do electronics work, you need to have the right tools and experience.